Bottle Fillers
-
Tapcooler Perlick 500 Series Connector
$6.99Item #: GF891Product HighLights
An adapter for the Tapcooler Counter Pressure Bottle Filler that allows it to be used with older 500 series Perlick faucets.
-
Tapcooler Ball Lock Adapter for CO2 Line
$14.99Item #: GF884Product HighLights
Easily connect a gas ball lock fitting into your Tapcooler Counter Pressure Bottle Filler with this handy ball lock CO2 adapter!
-
Tapcooler Intertap Extension Tube Kit - 20 in. (50cm)
$17.99Item #: GF889Product HighLights
A 20 inch extension tube that hooks directly into an Intertap beer faucet!
-
Tapcooler Beer Valve Keg Connector
$39.99Item #: GF890Product HighLights
An accesory that allows you to hook your Tapcooler Counter Pressure Bottle Filler straight to your ball lock or pin lock keg!
-
Tapcooler Counter Pressure Bottle Filler for Forward Sealing Faucets
$79.99Item #: GF883Product HighLights
- The Tapcooler Counter Pressure Bottle Filler is an all-new, easy-to-use bottling device!
- Allows you to perfectly bottle beer from a forward-sealing beer faucet without CO2 loss.
- Purge bottles and headspace with CO2 to keep oxygen out, prolonging the life of your beer.
- Perfect for bottling for competitions, sending bottles home with friends, or to take on the go!
- Easy to setup and super easy clean.
- EVERY SINGLE UNIT IS TESTED after they come off the factory line, so you can be assured yours will work when it arrives at your door!
-
Springless Bottle Filler (1/2")
$6.99Item #: 5402AProduct HighLights
A bottle filler that works perfectly on 1/2" tubing!
-
Bottle Filler with Spring (5/16")
$4.49Item #: 5401Product HighLights
A bottle filler that works perfectly with bottling buckets or regular sized Auto Siphons!
-
Fermtech ProFiller (5/16")
$6.99Item #: 4865Product HighLights
A bottle filler made specifically with ease of use, adjustability and sanitation in mind.
-
Tapcooler Filler Extension Tube Kit
$17.99–$22.99Item #: TAPCOOLER-EXT-KITProduct HighLights
- Allows you to use the Tapcooler Counter Pressure when there is not enough room directly under the tap.
- Available in various lengths to meet your setup needs.
- Comes with the fittings, tubing, and o-rings needed to hook it up.
- Fittings are made of stainless steel connected by food grade beverage tubing.
-
Tapcooler Pressure Relief Valve Drain Tube
$8.99Item #: GF893Product HighLights
A drain tube that attaches to the pressure relief valve on the Tapcooler Counter Pressure Bottle Filler to drain away excess beer!
-
CO2 Purge Valve Shaft for Tapcooler Filler
$9.99Item #: GF895Product HighLights
A replacement CO2 purge valve shaft for the Tapcooler Bottle Filler.
-
CO2 DMFit Collet/Fitting for Tapcooler Filler
$2.49Item #: GF895CProduct HighLights
Replacement DMFit Collet/Fitting for the Tapcooler Counter Pressure Bottle Filler. This is the piece that connects the Tapcooler to the barbed CO2 fitting and/or the CO2 ball lock adapter.