Product HighLights

• The Tapcooler Counter Pressure Bottle Filler is an all-new, easy-to-use bottling device!
• Allows you to perfectly bottle beer from a forward-sealing beer faucet without CO2 loss.
• Purge bottles and headspace with CO2 to keep oxygen out, prolonging the life of your beer.
• Perfect for bottling for competitions, sending bottles home with friends, or to take on the go!
• Easy to setup and super easy clean.
• EVERY SINGLE UNIT IS TESTED after they come off the factory line, so you can be assured yours will work when it arrives at your door!

Product HighLights

Easily connect a gas ball lock fitting into your Tapcooler Counter Pressure Bottle Filler with this handy ball lock CO2 adapter!

Product HighLights

• Allows you to use the Tapcooler Counter Pressure when there is not enough room directly under the tap.
• Available in various lengths to meet your setup needs.
• Comes with the fittings, tubing, and o-rings needed to hook it up.
• Fittings are made of stainless steel connected by food grade beverage tubing.

Product HighLights

• Allows you to mount your Tapcooler bottle filler to any magnetic surface, like the side of your kegerator or keezer.
• Provides effortless handsfree filling, while you get ready to fill the next bottle.
• Works with all versions of the Tapcooler.
• Extra strong dual pot magnets on the back provide a sturdy operating setup.

Product HighLights

• The Tapcooler Nanocanner™ is an all-new, easy-to-use can filling device!
• Allows you to perfectly fill your homebrew cans (standard 202 ends) without CO2 loss.
• Purge cans and headspace with CO2 to keep oxygen out, prolonging the life of your beer.
• Easy to setup and super easy clean.
• Can be mounted with either a magnetic or wall mounted bracket.
• Modular design allows you to also fill bottles with the Tapcooler straight from your forward sealing faucet!
• Multiple units can be interlinked together for a multi-head filler setup: double, triple, or even quadruple filler heads!

Product HighLights

A 20 inch extension tube that hooks directly into an Intertap beer faucet!

Product HighLights

An accesory that allows you to hook your Tapcooler Counter Pressure Bottle Filler straight to your ball lock or pin lock keg!

Product HighLights

• Allows you to use the Tapcooler filler with standard growlers.
• Easy installation and cleaning.
• Creates the perfect seal on your growlers for the best possible fill to help maintain freshness.

Product HighLights

• The Tapcooler Nanocanner™ is an all-new, easy-to-use can filling device!
• Allows you to perfectly fill your homebrew cans (standard 202 ends) without CO2 loss.
• The Nanocanner™ can attachment allows existing Tapcooler bottle filler owners to get started with filling cans.
• The innovative swivel, seal, and hold design not only seals the can, but also holds it in place so you can fill, hands free!
• Requires additional magnetic bracket mount (Part# GF1157A), or wall bracket mount (Part# GF1157B), or create your own mounting system!
• Works with standard 202 style cans

Product HighLights

• Allows you to mount the Tapcooler Nanocanner&trade can attachment to almost any magnetic surface, like the side of your kegerator.
• Includes two pot magnets with a weight rating of 60 lbs. each! That's a lot of weight for two small magnets!
• Hook multiple mounts together for a larger setup if you need to fill more than one can at a time.

Product HighLights

An adapter for the Tapcooler Counter Pressure Bottle Filler that allows it to be used with older 500 series Perlick faucets.

Product HighLights

A drain tube that attaches to the pressure relief valve on the Tapcooler Counter Pressure Bottle Filler to drain away excess beer!