Tapcooler Counter Pressure Bottle Filler & Accessories

Introducing the Tapcooler Counter Pressure Bottle Filler; the #1 way to fill bottles of your homebrew, directly from your kegging system. Just fit the Tapcooler into any forward sealing faucet (i.e. Perlick and Intertap), hook up a CO2 line, and you're good to go. Fill bottles for a competition, or just fill a couple take home bottles for your friends. The Tapcooler is quick and easy to use, and will keep your homebrew tasting the same out of the bottle as it would out of the tap. Make bottling your homebrew easier today, with the Tapcooler!
-
Tapcooler Counter Pressure Bottle Filler for Forward Sealing Faucets
Item #: GF883Product HighLights
- The Tapcooler Counter Pressure Bottle Filler is an all-new, easy-to-use bottling device!
- Allows you to perfectly bottle beer from a forward-sealing beer faucet without CO2 loss.
- Purge bottles and headspace with CO2 to keep oxygen out, prolonging the life of your beer.
- Perfect for bottling for competitions, sending bottles home with friends, or to take on the go!
- Easy to setup and super easy clean.
$79.99 -
Tapcooler Ball Lock Adapter for CO2 Line
Item #: GF884Product HighLights
Easily connect a gas ball lock fitting into your Tapcooler Counter Pressure Bottle Filler with this handy ball lock CO2 adapter!
$14.99 -
Tapcooler Filler Extension Tube Kit
Item #: TAPCOOLER-EXT-KITProduct HighLights
- Allows you to use the Tapcooler Counter Pressure when there is not enough room directly under the tap.
- Available in various lengths to meet your setup needs.
- Comes with the fittings, tubing, and o-rings needed to hook it up.
- Fittings are made of stainless steel connected by food grade beverage tubing.
$17.99–$22.99 -
Tapcooler Intertap Extension Tube Kit - 11 in. (30cm)
Item #: GF889Product HighLights
A 30cm (11 in.) extension tube that hooks directly into an Intertap beer faucet!
$17.99 -
Handsfree Adjustable Clip for the Tapcooler
Item #: GF1141Product HighLights
- Allows you to operate the Tapcooler "handsfree" while using it with an extension tube.
- Helps speed up bottling time as your hands are free while filling, to cap your previously filled bottle.
- Adjustable so you can use it with various bottle heights.
$13.99 -
Drip Tray for the Tapcooler Canning Station
Item #: GF892BProduct HighLights
- Upgrade the existing base of the Tapcooler Canning Station with this sleek drip tray.
- Integrates seamlessly with the canning station.
- Any spills are collected in the drip tray, and routed out the back via the included drain tube attachment.
$29.99 -
Tapcooler Perlick 500 Series Connector
Item #: GF891Product HighLights
An adapter for the Tapcooler Counter Pressure Bottle Filler that allows it to be used with older 500 series Perlick faucets.
$6.99 -
Tapcooler Pressure Relief Valve Drain Tube
Item #: GF893Product HighLights
A drain tube that attaches to the pressure relief valve on the Tapcooler Counter Pressure Bottle Filler to drain away excess beer!
$8.99 -
Tapcooler Canning Station Upgrade Kit
Item #: GF892Product HighLights
- Upgrade your existing Tapcooler bottle filler to be a can filler!
- Works with standard 202 end cans
- Table mount design allows you to work into almost any existing setup
- Requires an existing Tapcooler Bottle filler
- Can(s) not included
$79.99 -
O-Ring Replacement Set for Tapcooler Filler
Item #: GF882Product HighLights
This set replaces the main o-rings on the Tapcooler Counter Pressure filler. Comes with four (4) o-rings in total. Includes two faucet fitting o-rings, one main body o-ring, and one PRV poppet o-ring.
$1.49 -
CO2 Purge Valve Shaft for Tapcooler Filler
Item #: GF895Product HighLights
A replacement CO2 purge valve shaft for the Tapcooler Bottle Filler.
$9.99 -
CO2 DMFit Collet/Fitting for Tapcooler Filler
Item #: GF895CProduct HighLights
Replacement DMFit Collet/Fitting for the Tapcooler Counter Pressure Bottle Filler. This is the piece that connects the Tapcooler to the barbed CO2 fitting and/or the CO2 ball lock adapter.
$2.49