Presidents Day Sale 2023 Exclude List
-
New Style Zipper Case for Tapcooler Bottle Filler
$8.49Item #: GF1148Product HighLights
A new style zipper case for the Tapcooler Counter Pressure Bottle Filler.
-
Replacement PTFE Washer for Tapcooler Beer Valve Keg Connector
$1.59$0.79Item #: GF1149Product HighLights
A replacement white PTFE washer for the Tapcooler Beer Valve Keg Connector. Genuine replacement part from Tapcooler in Norway!
-
Silicone Growler Seal for the Tapcooler Counter Pressure Filler
$6.99Item #: GF1152Product HighLights
- Allows you to use the Tapcooler filler with standard growlers.
- Easy installation and cleaning.
- Creates the perfect seal on your growlers for the best possible fill to help maintain freshness.
-
Tapcooler Nanocanner™ Can Holder Attachment for 202 End Cans
$84.99Item #: GF1157Product HighLights
- The Tapcooler Nanocanner™ is an all-new, easy-to-use can filling device!
- Allows you to perfectly fill your homebrew cans (standard 202 ends) without CO2 loss.
- The Nanocanner™ can attachment allows existing Tapcooler bottle filler owners to get started with filling cans.
- The innovative swivel, seal, and hold design not only seals the can, but also holds it in place so you can fill, hands free!
- Requires additional magnetic bracket mount (Part# GF1157A), or wall bracket mount (Part# GF1157B), or create your own mounting system!
- Works with standard 202 style cans
-
Tapcooler Nanocanner™ Magnetic Bracket Mount
$42.99Item #: GF1157AProduct HighLights
- Allows you to mount the Tapcooler Nanocanner&trade can attachment to almost any magnetic surface, like the side of your kegerator.
- Includes two pot magnets with a weight rating of 60 lbs. each! That's a lot of weight for two small magnets!
- Hook multiple mounts together for a larger setup if you need to fill more than one can at a time.
-
Tapcooler Nanocanner™ Wall Mount
$29.99Item #: GF1157BProduct HighLights
A wall mounting bracket for the Tapcooler Nanocanner Canning Attachment.
-
O-Ring Replacement Set for Tapcooler Filler
$1.49Item #: GF882Product HighLights
This set replaces the main o-rings on the Tapcooler Counter Pressure filler. Comes with four (4) o-rings in total. Includes two faucet fitting o-rings, one main body o-ring, and one PRV poppet o-ring.
-
Tapcooler Counter Pressure Bottle Filler for Forward Sealing Faucets
$79.99Item #: GF883Product HighLights
- The Tapcooler Counter Pressure Bottle Filler is an all-new, easy-to-use bottling device!
- Allows you to perfectly bottle beer from a forward-sealing beer faucet without CO2 loss.
- Purge bottles and headspace with CO2 to keep oxygen out, prolonging the life of your beer.
- Perfect for bottling for competitions, sending bottles home with friends, or to take on the go!
- Easy to setup and super easy clean.
- EVERY SINGLE UNIT IS TESTED after they come off the factory line, so you can be assured yours will work when it arrives at your door!
-
Tapcooler Ball Lock Adapter for CO2 Line
$14.99Item #: GF884Product HighLights
Easily connect a gas ball lock fitting into your Tapcooler Counter Pressure Bottle Filler with this handy ball lock CO2 adapter!
-
Removal Tool for the Tapcooler Ball Lock Adapter
$1.99$0.99Item #: GF884AProduct HighLights
Easily remove your Tapcooler Ball Lock Adapter with this removal tool!
-
Tapcooler Intertap Extension Tube Kit - 20 in. (50cm)
$17.99Item #: GF889Product HighLights
A 20 inch extension tube that hooks directly into an Intertap beer faucet!
-
Tapcooler Beer Valve Keg Connector
$39.99Item #: GF890Product HighLights
An accesory that allows you to hook your Tapcooler Counter Pressure Bottle Filler straight to your ball lock or pin lock keg!